- Capacity 50 Lt, 100 Lt, 150 Lt, 200 Lt, 300 Lt
- AISI 304 quality stainless steel
- 1st wall base is 2 mm and it also has 0,8 mm Ep type laser welded cooler evaporator surface that is coupled to wall.
- 1 st wall body 1,5 mm
- Isolated body 1 mm
- Cooler unit is mounted from the bottom side of the tank body.
- There are 1, 25 W 21 d/d redactor and stainless steel mixer blade on redactor.
- Isolation range has 50 mm thickness, isolated with water based, non-HCFC high density polyurethane foam material.
- Product output has DN40-DN50 stainless, cleanable butterfly valve.
- There is also spring cover.
- There is Ø 200 mm covered product entry on the cover.
- There is manual measuring scale with ‰ 3-4 sensitivity rate.
- There are adjustable bolted stands under the tank.
- Design that allow zero liquid to remain in the rank during discharge.
- Welded sections are welded with 1 st class Argon TIG welding and has 1 st class
- smooth polishing.
- Fast Cooling without crystallization within minimum milk volume
- Minimum gas charging
- Cooling with R404 A gas
Lionmak Milk Cooling Tanks provide each milking to cool from 35 °C to 4 °C at ambient temperature (32 °C – 38 °C)
- Direct Expansion System
- TSE 13732/CE/EAC regulation of Compliance certificate
- Test of Compliance Certificate
- Optionally, design Suitable for 2, 4 and 6 milking time