The boiler is mainly made in accordance with EN 12953 rules and material requirements. Boiler sheets and pipes to be used in production are selected by our engineers and technicians, who are experts in their fields, in accordance with their technique. In order to ensure good combustion, which is the main condition for obtaining an excellent boiler efficiency, the combustion chamber is produced in sufficient length and diameter.
In the design of the boiler, there is absolutely no objectionable practice in terms of boiler technique, such as placing excessive thermal load on the heating surfaces in order to use less material and therefore to reduce costs. The thermal load is brought to the unit heating surface (square meter) at the most appropriate rate.
Thus, the danger of facing the danger of the combustion chamber collapsing due to regional overheating due to the difficulty of heat transfer, even in the case that the material (especially the combustion chamber) gets tired quickly and even if very little calcification (scale) occurs on the water side of the combustion chamber is completely eliminated. is happening.
Smoke pipes are welded to the mirror; Thus, in case of burning natural gas / LPG, heat accumulation at the pipe ends is prevented and the strength between the mirrors is increased.
A sufficient number of manholes and handholes are left on the boiler body. Boiler doors are produced by pouring fire concrete with an insulating material placed behind it in a way that is leak-proof and to minimize heat loss. After the production, the boiler body is 100 mm after the leakage control is done by applying the hydraulic test at the trial pressure to the boiler.
NATURAL GAS BURNER AND ACCESSORIES
It is the type of burner that is produced to work in harmony with our steam boiler and does not have service and spare parts supply problems.
BOILER FIXTURES AND AUTOMATICS 1 group
Main steam valve: PN16 DN 80 BONETTİ 1 pc.
Air release valve: PN16 DN 25 BONETTİ 1 pc.
Blowdown valve (spherical): PN16 DN 50 BONETTİ 1 pc.
Blowdown shut-off valve: PN16 DN 50 BONETTİ 1 pc.
Collector blowdown valve: PN16 DN 15 BONETTİ 1 pc.
Safety valve: PN16 DN 32 UNIVERSAL 2 pcs.
Level control system: ÜLK ÜNİVERSAL 1 pc.
Level indicator : Magnetic+Reflex UNIVERSAL 2 pcs. Pressure switch: RT-116 DANFOSS 3 pcs.
Manometer : UNIVERSAL 1 pc. Alarm whistle: 1 pc.
Surface thermostat: PT 100 1 pc.
Minimum level electrodes: EA 20 2 pcs.
Vacuum breaker : UNIVERSAL 1 pc.
Cooling tower: UNIVERSAL 5 pcs.